Posts

Showing posts from April, 2023

Basic Overview of ET200 SP HA

-
Image
The high-performance I/O system SIMATIC ET 200SP HA – perfectly matched to the requirements of the process industry and with clear advantages wherever ruggedness and maximum availability are important in the process and manufacturing industry. Benefits Availability: Redundancy at the PROFINET interface (S2 or R1) Hot swapping during runtime station expansion possible during runtime Easy to Use: Compact modules with permanent wiring. One terminal block for all 24 V standard signals Tool-free connection system with push-in-terminals Compact Design Compact with up to 56 i/o modules per station High concentration of up to 32 channels on a module that is only 22.5 mm wide System-integrated power bus Seamless integration in SIMATIC PCS new PROFINET IO communication standard Functions Main functions Compact I/O modules Up to 32 channels on a module that is 22.5 mm wide Up to 56 modules per station Perfectly suited for applications in the field Installation up to hazardous zone 2 Extended temp
Post a Comment
Read more

Advantage of Using CP1623/CP1628 in Engineering Station or OS server of PCS 7 Project

-
 Using a CP1623/CP1628 in the engineering station or OS server has the following benefits:  More than eight AS can be connected. High availability AS-OS connections with automatic switching of the communication can be configured(also possible with a network card for CPUs with firmware V6 or higher). The "OS simulation" function can also be used for a redundant automation system. The CP MAC address can have parameters assigned to it or be modified.     Note  If a BCE (Basic communication Ethernet) module is being used for communication instead of the CP 1623/CP1628,parameter cannot be assigned to MAC address. In the event of a fault (e.g. defective module) this may mean that the connection have to be reconfigured by the new MAC address of the replacement module and the project documentation has to be changed.       
Post a Comment
Read more